Simple Module Mac80211MultiChannel

Package: org.mixim.modules.mac
File: modules/mac/Mac80211MultiChannel.ned

Extends the the 802.11b MAC protocol by multi channel support meaning changing of the channel used for transmission and reception during run-time. This module is intended to be used in combination with the Decider80211MultiChannel as decider for the physical layer. See Nic80211MultiChannel for a pre configured NIC using this module.

Note: Decider80211MultiChannel does not model interference between adjacent channels!

This module supports ad-hoc mode only (does not generate or handle management frames), and does not support fragmentation, RTS threshold, duplication detection and recovery.

Usage diagram:

The following diagram shows usage relationships between types. Unresolved types are missing from the diagram. Click here to see the full picture.

Inheritance diagram:

The following diagram shows inheritance relationships for this type. Unresolved types are missing from the diagram. Click here to see the full picture.

Extends:

Mac80211 (simple module)

Implementation of the 802.11b MAC protocol. This module is intended to be used in combination with the Decider80211 as decider for the physical layer.

Used in compound modules:

If a module type shows up more than once, that means it has been defined in more than one NED file.

Nic80211MultiChannel (compound module)

This NIC implements an 802.11 network interface card with multi channel support and power consumption. Note: This NIC does not model interference between adjacent channels!

Parameters:

Name	Type	Default value	Description
notAffectedByHostState	bool	false
coreDebug	bool		debug switch
headerLength	double	272bit	length of the MAC packet header (in bits)
debug	bool	false	enable debugging for this module
queueLength	int
rtsCtsThreshold	int	-1	Number of bits in a packet before RTS/CTS is used. Is currently not used.
bitrate	double
autoBitrate	bool		auto bit rate selection support: specify borders at which to change modulation.
snr2Mbit	double		threshold to use 2Mbit (in dB)
snr5Mbit	double		threshold to use 5.5Mbit (in dB)
snr11Mbit	double		threshold to use 11Mbit (in dB)
neighborhoodCacheSize	int		keep information on neighborhood
neighborhoodCacheMaxAge	double		consider information in cache outdate if older than (in seconds)
txPower	double		the power to transmit packets with [mW]

Properties:

Name	Value	Description
class	Mac80211MultiChannel

Gates:

Name	Direction	Description
upperGateIn	input	from upper layer
upperGateOut	output	to uppe layer
upperControlIn	input	control from upper layer
upperControlOut	output	control to upper layer
lowerGateIn	input	from lower layer
lowerGateOut	output	to lower layer
lowerControlIn	input	control from lower layer
lowerControlOut	output	control to lower layer

Source code:

//
// Extends the the 802.11b MAC protocol by multi channel support meaning
// changing of the channel used for transmission and reception during run-time. 
// This module is intended to be used in combination with the 
// Decider80211MultiChannel as decider for the physical layer.
// See Nic80211MultiChannel for a pre configured NIC using this module.
//
// Note: Decider80211MultiChannel does not model interference between adjacent 
//       channels!
//
// This module supports ad-hoc mode only (does not generate or handle
// management frames), and does not support fragmentation, RTS threshold,
// duplication detection and recovery.
//
simple Mac80211MultiChannel extends Mac80211
{
    parameters:
        @class(Mac80211MultiChannel);
}