NED File src/linklayer/ethernet/EtherEncap.ned

Name	Description
EtherEncap (simple module)	Performs Ethernet II encapsulation/decapsulation.
Source code:

//
// Copyright (C) 2003 Andras Varga; CTIE, Monash University, Australia
//
// This program is free software; you can redistribute it and/or
// modify it under the terms of the GNU Lesser General Public License
// as published by the Free Software Foundation; either version 2
// of the License, or (at your option) any later version.
//
// This program is distributed in the hope that it will be useful,
// but WITHOUT ANY WARRANTY; without even the implied warranty of
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
// GNU Lesser General Public License for more details.
//
// You should have received a copy of the GNU Lesser General Public License
// along with this program; if not, see <http://www.gnu.org/licenses/>.
//

package inet.linklayer.ethernet;

//
// Performs Ethernet II encapsulation/decapsulation.
//
// Expected environment:
// - lowerLayerIn, lowerLayerOut gates should be connected to Ethernet EtherMAC
// - upperLayerIn, upperLayerOut gates should be connected to higher layer
//   protocol or application
//
// Functionality:
// - packets coming from upper layers will be encapsulated in EthernetIIFrame
//   and sent to MAC. EtherType is taken from the Ieee802Ctrl structure attached
//   to the message as control info (see setControlInfo(), controlInfo()
//   methods). Src address will be filled in by EtherMAC.
// - also accepts SENDPAUSE command (message kind=IEEE802CTRL_SENDPAUSE) from
//   higher layer: send PAUSE frame, as described in
//   <a href="ether-pause.html">PAUSE frames</a>.
// - Ethernet frames arriving from MAC will be decapsulated, and sent up to the
//   higher layers. Accepts EtherFrameWithLLC and EtherFrameWithSNAP too.
//
simple EtherEncap
{
    parameters:
        @display("i=block/square");
    gates:
        input upperLayerIn @labels(Ieee802Ctrl/down);   // higher layer
        output upperLayerOut @labels(Ieee802Ctrl/up); // higher layer
        input lowerLayerIn @labels(EtherFrame);   // to Ethernet MAC
        output lowerLayerOut @labels(EtherFrame); // to Ethernet MAC
}