Network RSVPTE4

Package: inet.examples.mpls.testte_tunnel
File: examples/mpls/testte_tunnel/RSVPTE4.ned

Example network to demonstrate RSVP-TE.

See the README file in the model directory for scenario description.

NAMTrace RSVP_LSR RSVP_LSR RSVP_LSR RSVP_LSR RSVP_LSR RSVP_LSR RSVP_LSR StandardHost StandardHost StandardHost StandardHost StandardHost ScenarioManager FailureManager

Usage diagram:

The following diagram shows usage relationships between types. Unresolved types are missing from the diagram. Click here to see the full picture.

Inheritance diagram:

The following diagram shows inheritance relationships for this type. Unresolved types are missing from the diagram. Click here to see the full picture.

Properties:

Name Value Description
isNetwork

Unassigned submodule parameters:

Name Type Default value Description
nam.logfile string ""

the name of the logfile ("trace.nam")
nam.prolog string ""
LSR1.rsvp.traffic xml

specifies paths to set up
LSR1.rsvp.helloInterval double
LSR1.rsvp.helloTimeout double
LSR1.classifier.conf xml
LSR1.networkLayer.ip.procDelay double 0s
LSR1.networkLayer.arp.retryTimeout double 1s

number seconds ARP waits between retries to resolve an IP address
LSR1.networkLayer.arp.retryCount int 3

number of times ARP will attempt to resolve an IP address
LSR1.networkLayer.arp.cacheTimeout double 120s

number seconds unused entries in the cache will time out
LSR1.ppp.ppp.mtu int 4470
LSR1.libTable.conf xml

table contents to be loaded on startup
LSR2.rsvp.traffic xml

specifies paths to set up
LSR2.rsvp.helloInterval double
LSR2.rsvp.helloTimeout double
LSR2.classifier.conf xml
LSR2.networkLayer.ip.procDelay double 0s
LSR2.networkLayer.arp.retryTimeout double 1s

number seconds ARP waits between retries to resolve an IP address
LSR2.networkLayer.arp.retryCount int 3

number of times ARP will attempt to resolve an IP address
LSR2.networkLayer.arp.cacheTimeout double 120s

number seconds unused entries in the cache will time out
LSR2.ppp.ppp.mtu int 4470
LSR2.libTable.conf xml

table contents to be loaded on startup
LSR3.rsvp.traffic xml

specifies paths to set up
LSR3.rsvp.helloInterval double
LSR3.rsvp.helloTimeout double
LSR3.classifier.conf xml
LSR3.networkLayer.ip.procDelay double 0s
LSR3.networkLayer.arp.retryTimeout double 1s

number seconds ARP waits between retries to resolve an IP address
LSR3.networkLayer.arp.retryCount int 3

number of times ARP will attempt to resolve an IP address
LSR3.networkLayer.arp.cacheTimeout double 120s

number seconds unused entries in the cache will time out
LSR3.ppp.ppp.mtu int 4470
LSR3.libTable.conf xml

table contents to be loaded on startup
LSR4.rsvp.traffic xml

specifies paths to set up
LSR4.rsvp.helloInterval double
LSR4.rsvp.helloTimeout double
LSR4.classifier.conf xml
LSR4.networkLayer.ip.procDelay double 0s
LSR4.networkLayer.arp.retryTimeout double 1s

number seconds ARP waits between retries to resolve an IP address
LSR4.networkLayer.arp.retryCount int 3

number of times ARP will attempt to resolve an IP address
LSR4.networkLayer.arp.cacheTimeout double 120s

number seconds unused entries in the cache will time out
LSR4.ppp.ppp.mtu int 4470
LSR4.libTable.conf xml

table contents to be loaded on startup
LSR5.rsvp.traffic xml

specifies paths to set up
LSR5.rsvp.helloInterval double
LSR5.rsvp.helloTimeout double
LSR5.classifier.conf xml
LSR5.networkLayer.ip.procDelay double 0s
LSR5.networkLayer.arp.retryTimeout double 1s

number seconds ARP waits between retries to resolve an IP address
LSR5.networkLayer.arp.retryCount int 3

number of times ARP will attempt to resolve an IP address
LSR5.networkLayer.arp.cacheTimeout double 120s

number seconds unused entries in the cache will time out
LSR5.ppp.ppp.mtu int 4470
LSR5.libTable.conf xml

table contents to be loaded on startup
LSR6.rsvp.traffic xml

specifies paths to set up
LSR6.rsvp.helloInterval double
LSR6.rsvp.helloTimeout double
LSR6.classifier.conf xml
LSR6.networkLayer.ip.procDelay double 0s
LSR6.networkLayer.arp.retryTimeout double 1s

number seconds ARP waits between retries to resolve an IP address
LSR6.networkLayer.arp.retryCount int 3

number of times ARP will attempt to resolve an IP address
LSR6.networkLayer.arp.cacheTimeout double 120s

number seconds unused entries in the cache will time out
LSR6.ppp.ppp.mtu int 4470
LSR6.libTable.conf xml

table contents to be loaded on startup
LSR7.rsvp.traffic xml

specifies paths to set up
LSR7.rsvp.helloInterval double
LSR7.rsvp.helloTimeout double
LSR7.classifier.conf xml
LSR7.networkLayer.ip.procDelay double 0s
LSR7.networkLayer.arp.retryTimeout double 1s

number seconds ARP waits between retries to resolve an IP address
LSR7.networkLayer.arp.retryCount int 3

number of times ARP will attempt to resolve an IP address
LSR7.networkLayer.arp.cacheTimeout double 120s

number seconds unused entries in the cache will time out
LSR7.ppp.ppp.mtu int 4470
LSR7.libTable.conf xml

table contents to be loaded on startup
host1.sctp.numGapReports int 3

====== SCTP Association Parameters =================================
host1.sctp.rtoInitial double 3s
host1.sctp.rtoMin double 1s
host1.sctp.rtoMax double 60s
host1.sctp.rtoAlpha double 0.125
host1.sctp.rtoBeta double 0.250
host1.sctp.maxBurst int 4
host1.sctp.assocMaxRetrans int 10
host1.sctp.pathMaxRetrans int 5
host1.sctp.maxInitRetrans int 8
host1.sctp.sackPeriod double 200ms
host1.sctp.sackFrequency int 2
host1.sctp.reactivatePrimaryPath bool false
host1.sctp.sendQueueLimit int 0
host1.sctp.validCookieLifetime double 10s

====== Testing =====================================================
host1.sctp.enableHeartbeats bool true

====== Heartbeats ==================================================
host1.sctp.hbInterval double 30s
host1.sctp.nagleEnabled bool true

====== Nagle Algorithm =============================================
host1.sctp.naglePoint int 1468
host1.sctp.fastRecoverySupported bool true

====== Congestion Control ==========================================
host1.sctp.sctpAlgorithmClass string "SCTPAlg"
host1.sctp.ccModule int 0

RFC4960=0
host1.sctp.ssModule int 0

ROUND_ROBIN=0
host1.sctp.arwnd int 65535
host1.sctp.swsLimit int 3000

Limit for SWS
host1.sctp.udpEncapsEnabled bool false
host1.pingApp.destAddr string ""

destination IP or IPv6 address
host1.pingApp.srcAddr string ""

source IP or IPv6 address (useful with multi-homing)
host1.pingApp.packetSize double 56B

of ping payload, in bytes
host1.pingApp.interval double 1s

time to wait between pings (can be random)
host1.pingApp.hopLimit double 32

TTL or hopLimit for IP packets
host1.pingApp.count double 0

stop after count ping requests, 0 means continuously
host1.pingApp.startTime double uniform(0s,this.interval)

send first ping at startTime
host1.pingApp.stopTime double 0s

send no pings after stopTime, 0 means forever
host1.pingApp.printPing bool true

dump on stdout
host1.networkLayer.ip.procDelay double 0s
host1.networkLayer.arp.retryTimeout double 1s

number seconds ARP waits between retries to resolve an IP address
host1.networkLayer.arp.retryCount int 3

number of times ARP will attempt to resolve an IP address
host1.networkLayer.arp.cacheTimeout double 120s

number seconds unused entries in the cache will time out
host1.ppp.ppp.mtu int 4470
host1.eth.mac.promiscuous bool false

if true, all packets are received, otherwise only the ones with matching destination MAC address
host1.eth.mac.address string "auto"

MAC address as hex string (12 hex digits), or "auto". "auto" values will be replaced by a generated MAC address in init stage 0.
host1.eth.mac.txrate double 100Mbps

maximum data rate supported by this station (bit/s); actually chosen speed may be lower due to auto- configuration. 0 means fully auto-configured.
host1.eth.mac.duplexEnabled bool true

whether duplex mode can be enabled or not; whether MAC will actually use duplex mode depends on the result of the auto-configuration process (duplex is only possible with DTE-to-DTE connection).
host1.eth.mac.mtu int 1500
host1.ext.filterString string
host1.ext.device string
host1.ext.mtu int 1500
host1.tcpdump.dumpFile string ""
host1.tcpdump.threadEnable bool false
host1.tcpdump.snaplen int 65535
host1.tcpdump.verbosity int 0
host2.sctp.numGapReports int 3

====== SCTP Association Parameters =================================
host2.sctp.rtoInitial double 3s
host2.sctp.rtoMin double 1s
host2.sctp.rtoMax double 60s
host2.sctp.rtoAlpha double 0.125
host2.sctp.rtoBeta double 0.250
host2.sctp.maxBurst int 4
host2.sctp.assocMaxRetrans int 10
host2.sctp.pathMaxRetrans int 5
host2.sctp.maxInitRetrans int 8
host2.sctp.sackPeriod double 200ms
host2.sctp.sackFrequency int 2
host2.sctp.reactivatePrimaryPath bool false
host2.sctp.sendQueueLimit int 0
host2.sctp.validCookieLifetime double 10s

====== Testing =====================================================
host2.sctp.enableHeartbeats bool true

====== Heartbeats ==================================================
host2.sctp.hbInterval double 30s
host2.sctp.nagleEnabled bool true

====== Nagle Algorithm =============================================
host2.sctp.naglePoint int 1468
host2.sctp.fastRecoverySupported bool true

====== Congestion Control ==========================================
host2.sctp.sctpAlgorithmClass string "SCTPAlg"
host2.sctp.ccModule int 0

RFC4960=0
host2.sctp.ssModule int 0

ROUND_ROBIN=0
host2.sctp.arwnd int 65535
host2.sctp.swsLimit int 3000

Limit for SWS
host2.sctp.udpEncapsEnabled bool false
host2.pingApp.destAddr string ""

destination IP or IPv6 address
host2.pingApp.srcAddr string ""

source IP or IPv6 address (useful with multi-homing)
host2.pingApp.packetSize double 56B

of ping payload, in bytes
host2.pingApp.interval double 1s

time to wait between pings (can be random)
host2.pingApp.hopLimit double 32

TTL or hopLimit for IP packets
host2.pingApp.count double 0

stop after count ping requests, 0 means continuously
host2.pingApp.startTime double uniform(0s,this.interval)

send first ping at startTime
host2.pingApp.stopTime double 0s

send no pings after stopTime, 0 means forever
host2.pingApp.printPing bool true

dump on stdout
host2.networkLayer.ip.procDelay double 0s
host2.networkLayer.arp.retryTimeout double 1s

number seconds ARP waits between retries to resolve an IP address
host2.networkLayer.arp.retryCount int 3

number of times ARP will attempt to resolve an IP address
host2.networkLayer.arp.cacheTimeout double 120s

number seconds unused entries in the cache will time out
host2.ppp.ppp.mtu int 4470
host2.eth.mac.promiscuous bool false

if true, all packets are received, otherwise only the ones with matching destination MAC address
host2.eth.mac.address string "auto"

MAC address as hex string (12 hex digits), or "auto". "auto" values will be replaced by a generated MAC address in init stage 0.
host2.eth.mac.txrate double 100Mbps

maximum data rate supported by this station (bit/s); actually chosen speed may be lower due to auto- configuration. 0 means fully auto-configured.
host2.eth.mac.duplexEnabled bool true

whether duplex mode can be enabled or not; whether MAC will actually use duplex mode depends on the result of the auto-configuration process (duplex is only possible with DTE-to-DTE connection).
host2.eth.mac.mtu int 1500
host2.ext.filterString string
host2.ext.device string
host2.ext.mtu int 1500
host2.tcpdump.dumpFile string ""
host2.tcpdump.threadEnable bool false
host2.tcpdump.snaplen int 65535
host2.tcpdump.verbosity int 0
host3.sctp.numGapReports int 3

====== SCTP Association Parameters =================================
host3.sctp.rtoInitial double 3s
host3.sctp.rtoMin double 1s
host3.sctp.rtoMax double 60s
host3.sctp.rtoAlpha double 0.125
host3.sctp.rtoBeta double 0.250
host3.sctp.maxBurst int 4
host3.sctp.assocMaxRetrans int 10
host3.sctp.pathMaxRetrans int 5
host3.sctp.maxInitRetrans int 8
host3.sctp.sackPeriod double 200ms
host3.sctp.sackFrequency int 2
host3.sctp.reactivatePrimaryPath bool false
host3.sctp.sendQueueLimit int 0
host3.sctp.validCookieLifetime double 10s

====== Testing =====================================================
host3.sctp.enableHeartbeats bool true

====== Heartbeats ==================================================
host3.sctp.hbInterval double 30s
host3.sctp.nagleEnabled bool true

====== Nagle Algorithm =============================================
host3.sctp.naglePoint int 1468
host3.sctp.fastRecoverySupported bool true

====== Congestion Control ==========================================
host3.sctp.sctpAlgorithmClass string "SCTPAlg"
host3.sctp.ccModule int 0

RFC4960=0
host3.sctp.ssModule int 0

ROUND_ROBIN=0
host3.sctp.arwnd int 65535
host3.sctp.swsLimit int 3000

Limit for SWS
host3.sctp.udpEncapsEnabled bool false
host3.pingApp.destAddr string ""

destination IP or IPv6 address
host3.pingApp.srcAddr string ""

source IP or IPv6 address (useful with multi-homing)
host3.pingApp.packetSize double 56B

of ping payload, in bytes
host3.pingApp.interval double 1s

time to wait between pings (can be random)
host3.pingApp.hopLimit double 32

TTL or hopLimit for IP packets
host3.pingApp.count double 0

stop after count ping requests, 0 means continuously
host3.pingApp.startTime double uniform(0s,this.interval)

send first ping at startTime
host3.pingApp.stopTime double 0s

send no pings after stopTime, 0 means forever
host3.pingApp.printPing bool true

dump on stdout
host3.networkLayer.ip.procDelay double 0s
host3.networkLayer.arp.retryTimeout double 1s

number seconds ARP waits between retries to resolve an IP address
host3.networkLayer.arp.retryCount int 3

number of times ARP will attempt to resolve an IP address
host3.networkLayer.arp.cacheTimeout double 120s

number seconds unused entries in the cache will time out
host3.ppp.ppp.mtu int 4470
host3.eth.mac.promiscuous bool false

if true, all packets are received, otherwise only the ones with matching destination MAC address
host3.eth.mac.address string "auto"

MAC address as hex string (12 hex digits), or "auto". "auto" values will be replaced by a generated MAC address in init stage 0.
host3.eth.mac.txrate double 100Mbps

maximum data rate supported by this station (bit/s); actually chosen speed may be lower due to auto- configuration. 0 means fully auto-configured.
host3.eth.mac.duplexEnabled bool true

whether duplex mode can be enabled or not; whether MAC will actually use duplex mode depends on the result of the auto-configuration process (duplex is only possible with DTE-to-DTE connection).
host3.eth.mac.mtu int 1500
host3.ext.filterString string
host3.ext.device string
host3.ext.mtu int 1500
host3.tcpdump.dumpFile string ""
host3.tcpdump.threadEnable bool false
host3.tcpdump.snaplen int 65535
host3.tcpdump.verbosity int 0
host4.sctp.numGapReports int 3

====== SCTP Association Parameters =================================
host4.sctp.rtoInitial double 3s
host4.sctp.rtoMin double 1s
host4.sctp.rtoMax double 60s
host4.sctp.rtoAlpha double 0.125
host4.sctp.rtoBeta double 0.250
host4.sctp.maxBurst int 4
host4.sctp.assocMaxRetrans int 10
host4.sctp.pathMaxRetrans int 5
host4.sctp.maxInitRetrans int 8
host4.sctp.sackPeriod double 200ms
host4.sctp.sackFrequency int 2
host4.sctp.reactivatePrimaryPath bool false
host4.sctp.sendQueueLimit int 0
host4.sctp.validCookieLifetime double 10s

====== Testing =====================================================
host4.sctp.enableHeartbeats bool true

====== Heartbeats ==================================================
host4.sctp.hbInterval double 30s
host4.sctp.nagleEnabled bool true

====== Nagle Algorithm =============================================
host4.sctp.naglePoint int 1468
host4.sctp.fastRecoverySupported bool true

====== Congestion Control ==========================================
host4.sctp.sctpAlgorithmClass string "SCTPAlg"
host4.sctp.ccModule int 0

RFC4960=0
host4.sctp.ssModule int 0

ROUND_ROBIN=0
host4.sctp.arwnd int 65535
host4.sctp.swsLimit int 3000

Limit for SWS
host4.sctp.udpEncapsEnabled bool false
host4.pingApp.destAddr string ""

destination IP or IPv6 address
host4.pingApp.srcAddr string ""

source IP or IPv6 address (useful with multi-homing)
host4.pingApp.packetSize double 56B

of ping payload, in bytes
host4.pingApp.interval double 1s

time to wait between pings (can be random)
host4.pingApp.hopLimit double 32

TTL or hopLimit for IP packets
host4.pingApp.count double 0

stop after count ping requests, 0 means continuously
host4.pingApp.startTime double uniform(0s,this.interval)

send first ping at startTime
host4.pingApp.stopTime double 0s

send no pings after stopTime, 0 means forever
host4.pingApp.printPing bool true

dump on stdout
host4.networkLayer.ip.procDelay double 0s
host4.networkLayer.arp.retryTimeout double 1s

number seconds ARP waits between retries to resolve an IP address
host4.networkLayer.arp.retryCount int 3

number of times ARP will attempt to resolve an IP address
host4.networkLayer.arp.cacheTimeout double 120s

number seconds unused entries in the cache will time out
host4.ppp.ppp.mtu int 4470
host4.eth.mac.promiscuous bool false

if true, all packets are received, otherwise only the ones with matching destination MAC address
host4.eth.mac.address string "auto"

MAC address as hex string (12 hex digits), or "auto". "auto" values will be replaced by a generated MAC address in init stage 0.
host4.eth.mac.txrate double 100Mbps

maximum data rate supported by this station (bit/s); actually chosen speed may be lower due to auto- configuration. 0 means fully auto-configured.
host4.eth.mac.duplexEnabled bool true

whether duplex mode can be enabled or not; whether MAC will actually use duplex mode depends on the result of the auto-configuration process (duplex is only possible with DTE-to-DTE connection).
host4.eth.mac.mtu int 1500
host4.ext.filterString string
host4.ext.device string
host4.ext.mtu int 1500
host4.tcpdump.dumpFile string ""
host4.tcpdump.threadEnable bool false
host4.tcpdump.snaplen int 65535
host4.tcpdump.verbosity int 0
host5.sctp.numGapReports int 3

====== SCTP Association Parameters =================================
host5.sctp.rtoInitial double 3s
host5.sctp.rtoMin double 1s
host5.sctp.rtoMax double 60s
host5.sctp.rtoAlpha double 0.125
host5.sctp.rtoBeta double 0.250
host5.sctp.maxBurst int 4
host5.sctp.assocMaxRetrans int 10
host5.sctp.pathMaxRetrans int 5
host5.sctp.maxInitRetrans int 8
host5.sctp.sackPeriod double 200ms
host5.sctp.sackFrequency int 2
host5.sctp.reactivatePrimaryPath bool false
host5.sctp.sendQueueLimit int 0
host5.sctp.validCookieLifetime double 10s

====== Testing =====================================================
host5.sctp.enableHeartbeats bool true

====== Heartbeats ==================================================
host5.sctp.hbInterval double 30s
host5.sctp.nagleEnabled bool true

====== Nagle Algorithm =============================================
host5.sctp.naglePoint int 1468
host5.sctp.fastRecoverySupported bool true

====== Congestion Control ==========================================
host5.sctp.sctpAlgorithmClass string "SCTPAlg"
host5.sctp.ccModule int 0

RFC4960=0
host5.sctp.ssModule int 0

ROUND_ROBIN=0
host5.sctp.arwnd int 65535
host5.sctp.swsLimit int 3000

Limit for SWS
host5.sctp.udpEncapsEnabled bool false
host5.pingApp.destAddr string ""

destination IP or IPv6 address
host5.pingApp.srcAddr string ""

source IP or IPv6 address (useful with multi-homing)
host5.pingApp.packetSize double 56B

of ping payload, in bytes
host5.pingApp.interval double 1s

time to wait between pings (can be random)
host5.pingApp.hopLimit double 32

TTL or hopLimit for IP packets
host5.pingApp.count double 0

stop after count ping requests, 0 means continuously
host5.pingApp.startTime double uniform(0s,this.interval)

send first ping at startTime
host5.pingApp.stopTime double 0s

send no pings after stopTime, 0 means forever
host5.pingApp.printPing bool true

dump on stdout
host5.networkLayer.ip.procDelay double 0s
host5.networkLayer.arp.retryTimeout double 1s

number seconds ARP waits between retries to resolve an IP address
host5.networkLayer.arp.retryCount int 3

number of times ARP will attempt to resolve an IP address
host5.networkLayer.arp.cacheTimeout double 120s

number seconds unused entries in the cache will time out
host5.ppp.ppp.mtu int 4470
host5.eth.mac.promiscuous bool false

if true, all packets are received, otherwise only the ones with matching destination MAC address
host5.eth.mac.address string "auto"

MAC address as hex string (12 hex digits), or "auto". "auto" values will be replaced by a generated MAC address in init stage 0.
host5.eth.mac.txrate double 100Mbps

maximum data rate supported by this station (bit/s); actually chosen speed may be lower due to auto- configuration. 0 means fully auto-configured.
host5.eth.mac.duplexEnabled bool true

whether duplex mode can be enabled or not; whether MAC will actually use duplex mode depends on the result of the auto-configuration process (duplex is only possible with DTE-to-DTE connection).
host5.eth.mac.mtu int 1500
host5.ext.filterString string
host5.ext.device string
host5.ext.mtu int 1500
host5.tcpdump.dumpFile string ""
host5.tcpdump.threadEnable bool false
host5.tcpdump.snaplen int 65535
host5.tcpdump.verbosity int 0
scenarioManager.script xml

Source code:

//
// Example network to demonstrate \RSVP-TE.
//
// See the README file in the model directory for scenario description.
//
network RSVPTE4
{
    submodules:
        nam: NAMTrace {
            parameters:
                @display("p=152,280");

        }
        LSR1: RSVP_LSR {
            parameters:
                peers = "ppp0 ppp1";
                @display("p=160,167");
            gates:
                pppg[5];
        }
        LSR2: RSVP_LSR {
            parameters:
                peers = "ppp0 ppp1 ppp2";
                @display("p=254,255");
            gates:
                pppg[3];
        }
        LSR3: RSVP_LSR {
            parameters:
                peers = "ppp0 ppp1 ppp2";
                @display("p=253,78");
            gates:
                pppg[3];
        }
        LSR4: RSVP_LSR {
            parameters:
                peers = "ppp0 ppp1 ppp2";
                @display("p=358,167");
            gates:
                pppg[3];
        }
        LSR5: RSVP_LSR {
            parameters:
                peers = "ppp0 ppp3 ppp4";
                @display("p=460,167");
            gates:
                pppg[5];
        }
        LSR6: RSVP_LSR {
            parameters:
                peers = "ppp0 ppp1";
                @display("p=400,300");
            gates:
                pppg[2];
        }
        LSR7: RSVP_LSR {
            parameters:
                peers = "ppp0 ppp1";
                @display("p=400,50");
            gates:
                pppg[2];
        }
        host1: StandardHost { // client
            parameters:
                @display("p=71,80;i=device/pc2");
        }
        host2: StandardHost { // client
            parameters:
                @display("p=72,153;i=device/pc2");
        }
        host3: StandardHost { // server
            parameters:
                @display("p=570,88;i=device/server");
        }
        host4: StandardHost { // server
            parameters:
                @display("p=562,256;i=device/server");
        }
        host5: StandardHost { // client
            parameters:
                @display("p=73,233;i=device/pc2");
        }
        scenarioManager: ScenarioManager {
            parameters:
                @display("p=150,50");
        }
        failureManager: FailureManager {
            parameters:
                @display("p=500,50");
        }
    connections:
        LSR1.pppg[0] <--> {  delay = 15ms; datarate = 600Kbps; } <--> LSR2.pppg[0];
        LSR1.pppg[1] <--> {  delay = 5ms; datarate = 600Kbps; } <--> LSR3.pppg[0];
        host2.pppg++ <--> {  delay = 10ms; datarate = 600Kbps; } <--> LSR1.pppg[2];
        host1.pppg++ <--> {  delay = 10ms; datarate = 600Kbps; } <--> LSR1.pppg[3];
        LSR2.pppg[1] <--> {  delay = 5ms; datarate = 600Kbps; } <--> LSR4.pppg[0];
        LSR3.pppg[1] <--> {  delay = 5ms; datarate = 600Kbps; } <--> LSR4.pppg[2];
        LSR4.pppg[1] <--> {  delay = 5ms; datarate = 600Kbps; } <--> LSR5.pppg[0];
        LSR5.pppg[1] <--> {  delay = 10ms; datarate = 600Kbps; } <--> host3.pppg++;
        LSR5.pppg[2] <--> {  delay = 10ms; datarate = 600Kbps; } <--> host4.pppg++;
        LSR2.pppg[2] <--> {  delay = 10ms; datarate = 600Kbps; } <--> LSR6.pppg[0];
        LSR5.pppg[3] <--> {  delay = 10ms; datarate = 600Kbps; } <--> LSR6.pppg[1];
        LSR3.pppg[2] <--> {  delay = 10ms; datarate = 600Kbps; } <--> LSR7.pppg[0];
        LSR5.pppg[4] <--> {  delay = 10ms; datarate = 600Kbps; } <--> LSR7.pppg[1];
        host5.pppg++ <--> {  delay = 10ms; datarate = 600Kbps; } <--> LSR1.pppg[4];
}

This documentation is released under the Creative Commons license